home *** CD-ROM | disk | FTP | other *** search
/ BBS Toolkit / BBS Toolkit.iso / pc_board / fp11s.zip / FIDOPCB.CFG < prev    next >
Text File  |  1992-01-31  |  6KB  |  157 lines

  1. ;==========================================================================
  2. ; FidoPCB - PCBoard & FidoNet interface      (C) MicroArt BBS 1992
  3. ;
  4. ; Sample configuration file
  5. ;
  6. ; Valid commands are: ORIGIN, TAG, SYSOP, NODE, AREA, AREA_MSGS, MAIL,
  7. ;                     PACKET, WORK, FILE, FILE, COMPRESS, FLOW_TYPE,
  8. ;                     AKA, USE_AKA, AKA_TAG, INTERFACE, NET_TOSS,
  9. ;                     NETWORK, LOST_MAIL, NET_MAIL, PCBOARD, FRONTDOOR,
  10. ;                     ZIP, UNZIP, ARC, UNARC, ARJ, UNARJ, LZH, UNLZH
  11. ;
  12. ;
  13. ; WARNING! Do not use empty lines, use comment sign ';' instead
  14. ;          Do not use TABs, use spaces instead 
  15. ;          Every line should end with LF/CR
  16. ;          Maximum line lenght is 512 characters
  17. ;          Maximum path lenght is 64 characters
  18. ;==========================================================================
  19. ;
  20. ; what interface to use (FRONTDOOR - default, BINKLEY, NONE)
  21. INTERFACE frontdoor
  22. ;
  23. ; what to do with NET MAIL (BOTH - default, PCBOARD, FRONTDOOR
  24. ; option PCBOARD will import/export net mail messages and delete them
  25. ; option FRONTDOOR  wil leave net mail to be proccessed by FrontDoor
  26. NET_TOSS pcboard
  27. ;
  28. ; If you are using Network or multitasking and you need to open files in 
  29. ; shareable mode. (OFF - default, ON) It requres SHARE.EXE on multitasking
  30. ; systems
  31. NETWORK off
  32. ;
  33. ; location of *.MSG (messages in Front Door)
  34. MAIL     m:\pcb\front\mail
  35. ;
  36. ; location of outbound packets
  37. PACKET   m:\pcb\front\packet
  38. ;
  39. ; needed for FidoPCB work directory  (use RAM disk if possible)
  40. WORK     e:
  41. ;
  42. ; location of inbound packets ( *.MO?, *.TH? ... files) you received from your 
  43. ; hub or boss
  44. FILE     m:\pcb\front\file
  45. ;
  46. ; location of message base to import lost mail (from 'not found' areas)
  47. ; remember to put on this directory files LOST and LOST.NDX and
  48. ; to setup them in PCBSetup as LOST
  49. LOST_MAIL m:\pcb\fido\lost
  50. ; (ATTENTION ! this means that message base LOST and its index LOST.NDX are
  51. : stored on the directory m:\pcb\fido\lost\)
  52. ;
  53. ; location of message base for MATRIX (NetMail)
  54. ; remember to put on this directory files MATRIX and MATRIX.NDX and
  55. ; to setup them in PCBSetup as MATRIX
  56. ; addresses are put in first line of the message in PCBoard 
  57. ; in format (Z:RRR/NNN)
  58. NET_MAIL m:\pcb\fido\matrix
  59. ;
  60. ; location of PCBOARD.SYS
  61. PCBOARD m:\pcb
  62. ;
  63. ; location of FrontDoor EXE files
  64. FRONTDOOR m:\pcb\front
  65. ;
  66. ; PKZIP, PKUNZIP archiver path and name (you may not use this parameter if 
  67. ; you have set DOS PATH to the directory of archivers)
  68. ZIP  c:\util\pkzip.exe
  69. UNZIP c:\util\pkunzip.exe
  70. ;
  71. ;
  72. ; location and name of archiver/dearchiver
  73. ARC c:\util\pkarc.exe
  74. UNARC c:\util\pkxarc.exe
  75. ;
  76. ; Your node address in format Z:RRR/NNN, sysop name
  77. ORIGIN   2:333/506
  78. SYSOP    Gregor Rudolf
  79. ; tag will be appended on the bottom of exported messages
  80. TAG      MicroArt BBS - The best in Koper,Slovenija (2:333/506)
  81. ;
  82. ;============================================
  83. ; AKA - declaration of AKA adresses (aliases)
  84. ;--------------------------------------------
  85. ;     AKA #    Address
  86. ;--------------------------------------------
  87. AKA     1      2:380/100
  88. ;
  89. ; there can be up to 10 AKAS defined for your node
  90. ;
  91. ; this tag will be appended as origin tag when AKA 1 is active
  92. AKA_TAG  MicroArt BBS - 38 Region HUB (2:380/100)
  93. ;
  94. ;
  95. ;=====================================
  96. ; AREA - declaration of message areas
  97. ;------------------------------------------------------------------------------------------------
  98. ;     Area #    Name (exactly as in Fido)  Location of message base    Use/don't use message base
  99. ;------------------------------------------------------------------------------------------------
  100. AREA     1           NetSysop.333          m:\pcb\fido\55             
  101. ;
  102. ; default message base name is MSGS, but you can specify other names
  103. ; this line will tell FidoPcb to look for SYSOPS. and SYSOPS.NDX files
  104. AREA_MSGS Sysops
  105. ;
  106. ;
  107. AREA     2           Echoser.033           m:\pcb\fido\56
  108. ;
  109. AREA     3           Sysop.033             m:\pcb\fido\57
  110. AREA     4           Clang.Ita             m:\pcb\fido\58
  111. AREA     5           Pgmrs                 m:\pcb\fido\59
  112. AREA     6           Vax                   m:\pcb\fido\60          NOMSG
  113. ; NOMSG indicates this area will not be written into MSGS for  <--------
  114. ; PCBoard but is only 'pass through'
  115. AREA     7           Clipper               m:\pcb\fido\62
  116. AREA     8           Green.029             m:\pcb\fido\54
  117. AREA     9           Windows.Ita           m:\pcb\fido\67
  118. AREA    10           C_ECHO                m:\pcb\fido\68
  119. AREA    11           BBS_SOFT.ITA          m:\pcb\fido\70
  120. AREA    12           TECH_NET.ITA          m:\pcb\fido\71
  121. AREA    13           Fidotest              m:\pcb\fido\73
  122. AREA    14           Enet.Soft             m:\pcb\fido\72
  123. AREA    15           Sysop.600             m:\pcb\fido\79
  124. ;
  125. ;
  126. ;=============================
  127. ; NODE - declaration of nodes
  128. ;----------------------------------------------------------------------------------------
  129. ;        Node address    Selected areas # (numbers must be defined with AREA command!!!)
  130. ;----------------------------------------------------------------------------------------
  131. NODE     2:333/504        
  132. ;
  133. ; sysop name for this node
  134. SYSOP    Pietro Budicin
  135. ;
  136. ; compression method for this node (default is ZIP): ARC, ARJ, ZIP, LHA
  137. COMPRESS ZIP
  138. ;
  139. ; packet flow type (default is NORMAL): NORMAL, HOLD, IMMEDIATE, CRASH
  140. FLOW_TYPE HOLD
  141. ;
  142. ;
  143. NODE     2:333/600        1,2,3,7,15
  144. SYSOP    Maurizio Biondi
  145. COMPRESS ZIP
  146. ;
  147. ;
  148. NODE     2:380/101        7,10,13
  149. SYSOP    Matjaz Potrc
  150. COMPRESS ZIP
  151. FLOW_TYPE HOLD
  152. ;
  153. ; AKA # to be used with this node
  154. USE_AKA 1   ;this means, that for node 2:380/101 my origin will be 2:380/100
  155. ;
  156. ;<eof>